HAHN+KOLB Werkzeuge GmbH

Website:	http://www.hahn-kolb.de
Email:	[email protected]

Street:	Schlieffenstraße 40
ZIP/City:	71636 Ludwigsburg
Country:	DEUTSCHLAND

Phone:	07141/498-0
Fax:	07141/498-4999

Geschäftsführer:	Frau Katrin Hummel Herr Andreas Kräutle

Load cell machines (www.industrial-production.de)

Protection in the cupboard

A manufacturer of electric motors and large drives wanted to optimize the issuing of personal protective equipment. The handing out process was manual and needed to be simpler, faster and more economical. The tool service provider Hahn+Kolb had a new complete solution for this: automatic load cell machines that automate all administrative and issuing processes.

Success story of a tool service provider

The Hahn+Kolb Group, one of the world's leading tool service providers and system suppliers, is celebrating its 125th anniversary this year - and also ten years at the new company site in Ludwigsburg. A success story, as the development of the international logistics center shows. And the course has already been set for the future.

Hahn+Kolb increases market share and pushes sustainability

Hahn+Kolb Werkzeuge continues its successful course with another double-digit increase in sales of 14.5%.

Hahn+Kolb strengthens specialist advice for PPE

Safety in the workplace and the personal protection of all employees are a special responsibility - for employers as well as for Hahn+Kolb as a supplier of personal protective equipment (PPE).

Own brand celebrates anniversary

Hahn+Kolb's own brand Atorn has stood for quality, innovation and emotion for 20 years, winning over customers. Quality is the top priority, all tools are made of high-quality materials and have a solid finish - for maximum reliability in everyday use.

Focus on digitalization and automation

For Hahn+Kolb, AMB is all about digitalization and automation. The tool service provider and system supplier will be presenting its solutions for process optimization.

State-of-the-art workstations at the training center

The new AZTe training center for technology in Pforzheim relies on networked systems for tool and equipment allocation right from the start. And on a modern and optimal learning environment for the prospective metalworkers.

Hahn+Kolb achieves double-digit growth

2021 was a good year for Hahn+Kolb Werkzeuge. Compared to the previous year, the Hahn+Kolb Group's turnover increased by more than 20% to over 315 million euros.

Tools put together individually

A tool set should be tailored to the needs of the employees and supplied in a suitable case, cabinet or trolley. The Hahn+Kolb tooling service makes this possible by assembling the items and creating individual sets.

Efficient workplaces

Whether in the workshop, warehouse or at the workplace - keeping materials and tools perfectly organized ensures efficient everyday work processes.

The perfect workplace with order

HK-Betriebsausstattung from Hahn+Kolb offers an extensive range of different products and individual solutions.

Protective gloves for assembly and logistics

Hahn+Kolb has expanded its PPE range with two new glove series called A-Mech and A-Shield from its own Atorn brand.

Milling the hard way

Machining steels with up to 70 HRC is a challenge for tool and mold makers. Modern hard milling cutters can make this possible with sufficient tool life and in just one clamping operation.

Workstation with remote control

The system workstations from Hahn+Kolb consist of a base frame and worktop and are available in standardized system widths of 1,200, 1,600 and 2,000 millimetres with a maximum load capacity of 350 kilograms.

Locker with face recognition

Biometric data for verification has already proven its worth in areas such as smartphones and tablets as well as in access control. Hahn+Kolb relies on the same system for the security of cabinet systems.

New Atorn flat key program

With the new flat wrench range from Atorn, Hahn+Kolb offers a significantly expanded range with 15 times greater corrosion protection compared to conventional chrome-plated wrenches.

Processing of miniature components

Hahn+Kolb offers the Atorn miniature boring program with ISO indexable inserts for the turning of complex, very small components. The series includes boring bars and holders made of steel and solid carbide for boring depths of up to 3×D (steel) and 4×D (solid carbide).

Measuring technical surfaces

Hahn+Kolb presents new measuring devices from its own Atorn brand. These include solutions for measuring the roughness of surfaces, measuring contours and checking layer thicknesses, dew points and surface profiles.

Tool systems for modern production

At Intec in Leipzig, the tool service provider and system supplier Hahn+Kolb provided an insight into its full range of products from machining and operating resources to industrial 3D printers and tool dispensing systems.

Hahn+Kolb receives Preferred Supplier Award again

Hahn+Kolb has received the Bosch Group's coveted Supplier Award for the third time.

Hahn+Kolb celebrates its 120th anniversary

In 2018, the Hahn+Kolb Group is celebrating its 120th anniversary. The globally active tool service provider and system supplier with 14 foreign subsidiaries, 38 sales partners in a total of 49 countries and customers from the mechanical engineering, automotive, metal, electronics and energy industries has its sights firmly set on intelligent procurement solutions and the latest manufacturing processes.

High-performance reamers in various materials

To enable the fine machining of bores in series production, Hahn+Kolb offers new HPC reamers from Atorn for steel, cast iron, stainless steel and hardened materials.

Mobile and precise component testing

At Control, Hahn+Kolb will be presenting the new Q10 CHD-Master low-load hardness tester from Qness for testing hardness gradients on surface-hardened components, the Sonodur2 mobile UCI hardness tester, the HK-MAT FP automatic dispenser for the safe storage of measuring and testing equipment and the Multirap 800 industrial 3D printer from Multec.

Precisely tested all round

Hahn und Kolb offers a new rotary test table from Atorn for the precise measurement of radial and axial run-outs on rotationally symmetrical components. The component is simply placed on the table, roughly aligned and checked at various points using dial gauges.

Hahn+Kolb records 13.5 percent growth in 2017

Tool service provider and system supplier Hahn+Kolb increased its turnover by 13.5 percent to 285 million euros in the 2017 financial year.

The workshop you can touch

At this year's LogiMat, tool service provider and system supplier Hahn + Kolb will be presenting its portfolio for planning and equipping an efficient workshop.

Additive manufacturing as an economical alternative

With the M800 industrial printer, Hahn+Kolb now offers a 3D printer with a multiple print head. According to the manufacturer, this enables precise multiple printing with up to four different materials with clean separation.