Atlas Copco Kompressoren und Drucklufttechnik GmbH

Website:	http://www.atlascopco.de
Email:	[email protected]

Street:	Langemarckstr. 35
ZIP/City:	45141 Essen
Country:	DEUTSCHLAND

Phone:	0201/21770
Fax:	0201/216917

Mobile pump systems (www.industrial-production.de)

Atlas Copco takes over long-standing sales partner

Atlas Copco has taken over Heide-Pumpen. The specialist for mobile pumps has been working closely with Atlas Copco in sales and service for a long time, especially for surface pumps for construction site dewatering and wastewater detour or in the field of civil defense.

Atlas Copco takes over Druckluft-Technik-Nord

Atlas Copco has taken over Druckluft-Technik-Nord, a distributor of compressors and compressed air technology.

Apply pressure so that the air doesn't run out

With new turbo compressors, a chemical company saves around 2 million kWh of energy per year - around 20 percent compared to the energy requirements of the old compressed air supply. The_{CO2 footprint} has also been significantly reduced. The rotary drum dryers, which efficiently regenerate the desiccant with the heat generated during the compression process, also contribute to this.

Atlas Copco takes over Kawalek Compressors

Atlas Copco has acquired Kawalek Kompressoren. The company sells compressors and compressed air technology as well as related services.

Atlas Copco brings dealer partners on board

With the partnership with Oltrogge Bielefeld, Atlas Copco has brought a powerful partner for compressed air technology on board and is thus consistently implementing its growth strategy for service and sales of compressed air technology.

Speed control reduces reactive current costs

Even in small companies, it pays to generate compressed air as economically and_{CO2-neutrally} as possible. By switching to a speed-controlled screw compressor, a CNC manufacturer has succeeded in reducing the energy required for compressed air production by more than 20 percent.

Conveying with compressed air saves energy

Unilever has replaced four positive displacement blowers in Mannheim with more energy-efficient, oil-free screw blowers from Atlas Copco. The compressed air is used to pneumatically convey intermediate products from the wash piece production to the packaging lines.

Efficiency of 97 percent

The ZS 4 VSD+ oil-free screw blower, which Atlas Copco will be presenting at IFAT in May, is highly efficient thanks to its economical IE5 permanent magnet motor.

Energy saving (www.polyformnext.de)

Compressors for powder and granulate conveying

Blowers and compressors for conveying bulk materials will be presented at the Solids trade fair in Dortmund on April 1 and 2. Users can save up to 30 percent energy, the supplier promises.

Atlas Copco: Florian Eckert is the new Business Area Manager

Florian Eckert has headed the Industrial Compressed Air division of Atlas Copco Compressors and Compressed Air Technology in Essen since February 1.

Atlas Copco plans takeover of Scheugenpflug

The Swedish industrial group Atlas Copco intends to take over Scheugenpflug and integrate it into its Industrial Assembly Solutions division. The company specializes in highly automated system solutions in adhesive bonding and dispensing technology as well as dispensing systems for vacuum potting.

Atlas Copco: Erik Felle is the new Managing Director in Bretten

Erik Felle has been Managing Director of Atlas Copco IAS in Bretten since September 1. He is responsible for the business of the Central and Southwest Europe customer center in the Industrial Joining Technologies division.

Compressor trio puts the pressure on

An old compressor was to be replaced at a special machine manufacturer. Instead of one large machine, three smaller screw compressors from Atlas Copco now work together in an energy-efficient manner.

Optimum air supply

Kautex Maschinenbau develops and manufactures extrusion blow molding machines. Machines from the KBB series are assembled, tested and optimized in the new production hall. The required compressed air is generated by Atlas Copco compressors and flexibly fed to the machines via swivel-mounted booms.

Atlas Copco: Own repair center for joining technology components

At the Bretten site, Atlas Copco has set up its own repair center for system components for joining technology systems. These include SCA gluing and dispensing systems as well as Henrob self-pierce riveting systems.

"Efficient compressed air treatment also requires the right filter"

Anyone planning a compressed air station may not attach enough importance to the filter technology, says Atlas Copco's Product Manager Christian Baer. This is because it not only influences the compressed air quality, but also the energy efficiency of the system.

Atlas Copco takes over IPV

Atlas Copco has taken over the German company Industrie-Pumpen Vertriebs GmbH (IPV) based in Dresden.

Pumps for the glass industry

For applications with a high vacuum requirement, for example in glass processing, Atlas Copco has introduced the speed-controlled screw vacuum pump series GHS 3800-5400 VSD+.

Atlas Copco takes over Quiss

Atlas Copco has acquired Quiss Qualitäts-Inspektionssysteme und Service AG, a provider of visual quality control systems based in Puchheim near Munich.

Atlas Copco: optimized heat recovery

Metalworking and processing company Prevent TWB in Hagen has installed a heat recovery system in its new compressor station. Five oil-injected screw compressors from Atlas Copco reliably supply compressed air, heat the production hall and premises and also save electricity.

Compressed air supply from Atlas-Copco in the burner

From Munich to Verona in three hours - Herrenknecht tunnel boring machines drive up the mountain at the Brenner Pass. Among other things, they are equipped with robust, oil-injected compressors from Atlas Copco.

Oil-water separator reduces disposal costs

Atlas Copco is launching a new oil/water separator for smaller compressed air installations: the OSS.

Atlas Copco wants to take over Klingel Fügetechnik

The industrial group Atlas Copco intends to take over the joining technology division of Klingel GmbH, Geretsried.

Atlas Copco: another record year with global sales of 12 billion euros

In 2017, the Swedish industrial group Atlas Copco increased its turnover by 15 percent to 116 billion Swedish kronor (SEK) worldwide (12 billion euros).

Dry compressed air even more efficiently

Atlas Copco presents its new CD 25-260+ series. It dries a volume flow of 25 to 260 liters of compressed air per second (l/s).